Stumpgrinding
Stumpgrinding
After the felling of trees, the remaining stumps must be completely cleaned up. Stump Cutters reduce these stumps completely, but the chisels on these machines do have a lot of wear, not just through the woods but especially when they have to work through sand
That is precisely why these bits should not be too costly. ATWT knows this and has therefore developed chisels with an optimum price / performance ratio. Various systems are conceivable, each with its own advantage. Look below the range, or contact us.
-
Bolt, ⅝ inch, 1½ inch long, with fine thread (UNF)
For more information you must be logged in. -
Stumpcutter ATWT stijl, holder, 5/8 thread
For more information you must be logged in. -
Stumpcutter ATWT stijl, holder, bored
For more information you must be logged in. -
Stumpcutter ATWT style, 'Bent' left with 1 carbide tip
For more information you must be logged in. -
Stumpcutter ATWT style, 'Bent' right with 1 carbide tip
For more information you must be logged in. -
Stumpcutter ATWT style, 'Bent' right with 1 carbide tip
For more information you must be logged in. -
Stumpcutter ATWT style, 'Bent' right with 1 carbide tip
For more information you must be logged in. -
Stumpcutter ATWT style, 'Neutral' left with 1 carbide tip
For more information you must be logged in. -
Stumpcutter ATWT style, 'Neutral' right with 1 carbide tip
For more information you must be logged in.